Acetylcholinesterase inhibitory activity from Amaryllis belladonna growing in Chile: enzymatic and molecular docking studies

Features in the NMR spectra of the aglycones of Agave spp. saponins. HMBC method for aglycone identification (HMAI)

Biocidal activity of citrus limetta peel extract mediated green synthesized silver quantum dots against MCF-7 cancer cells and pathogenic bacteria

Wettability of cellulose surfaces under the influence of an external electric field

Hemicelluloses monosaccharides and their effect on molybdenite flotation

Effects on Lignin Redistribution in Eucalyptus globulus Fibres Pre-Treated by Steam Explosion: A Microscale Study to Cellulose Accessibility

Influence of lignin distribution, physicochemical characteristics and microstructure on the quality of biofuel pellets made from four different types of biomass

Fast Pyrolysis of Hemicelluloses into Short-Chain Acids: An Investigation on Concerted Mechanisms

Co-pyrolysis of coal and raw/torrefied biomass: A review on chemistry, kinetics and implementation

Kinetic and structural understanding of bulk and supported vanadium-based catalysts for furfural oxidation to maleic anhydride

Thermodynamic and Kinetic Mechanisms of Bornite/Chalcopyrite/Magnetite Formation During Partial Roasting of High-Arsenic Copper Concentrates

Partial Roasting of High-Arsenic Copper Concentrates

Plant natural products with anti-thyroid cancer activity

Turmeric and Its Major Compound Curcumin on Health: Bioactive Effects and Safety Profiles for Food, Pharmaceutical, Biotechnological and Medicinal Applications

The Therapeutic Potential of Anthocyanins: Current Approaches Based on Their Molecular Mechanism of Action

Green Extraction of Alkaloids and Polyphenols from Peumus boldus Leaves with Natural Deep Eutectic Solvents and Profiling by HPLC-PDA-IT-MS/MS and HPLC-QTOF-MS/MS

Isolation of Three Lycorine Type Alkaloids from Rhodolirium speciosum (Herb.) Ravenna Using pH-Zone-Refinement Centrifugal Partition Chromatography and Their Acetylcholinesterase Inhibitory Activities

Condensed tannin resins extracted from Pinus radiata bark as a support matrix in carbon nanofiber-reinforced polymers

Eco-Friendly Fire-Resistant Coatings Containing Dihydrogen Ammonium Phosphate Microcapsules and Tannins

Copper-Polyurethane Composite Materials: Particle Size Effect on the Physical-Chemical and Antibacterial Properties

Effect of lignin and hemicellulose on the properties of lignocellulose nanofibril suspensions

Utilization of Marine Waste to Obtain β-Chitin Nanofibers and Films from Giant Humboldt Squid Dosidicus gigas

Insights into Hydrodeoxygenation of Furfural and Guaiacol Mixture: Experimental and Theoretical Studies

Improvement of endothelial function by Gunnera tinctoria extract with antioxidant properties

Effect of Ni Metal Content on Emulsifying Properties of Ni/CNTox Catalysts for Catalytic Conversion of Furfural in Pickering Emulsions

Berberis microphylla G. Forst (Calafate) Berry Extract Reduces Oxidative Stress and Lipid Peroxidation of Human LDL

Carrageenan-based physically crosslinked injectable hydrogel for wound healing and tissue repairing applications

A Novel Hydrocolloid Film Based on Pectin, Starch and Gunnera tinctoria and Ugni molinae Plant Extracts for Wound Dressing Applications

Phytostimulant properties of highly stable silver nanoparticles obtained with saponin extract from Chenopodium quinoa

Effect of Boron in the Coarsening Rate of Chromium-Rich Carbides in 9%–12% Chromium Martensitic Creep-Resistant Steel: Experiment and Modeling at 650 °C

Raman microimaging as an analytical technique for simultaneous quantification and localization of active principles in pharmaceutical solid dosage forms

Conversion of succinic acid over Ni and Co catalysts

Polymeric nanoencapsulation of alpha interferon increases drug bioavailability and induces a sustained antiviral response in vivo

Kinetics of oxygen transfer reactions on the graphene surface. Part II. H2O vs. CO2

Impact of physical and physicochemical properties of supplementary cementitious materials on structural build-up of cement-based pastes

The Cramer’s rule for the parametrization of phenol and its hydroxylated byproducts: UV spectroscopy vs. high performance liquid chromatography

Medicinal plants used in the treatment of Malaria: A key emphasis to Artemisia, Cinchona, Cryptolepis, and Tabebuia genera

Carbon Sequestration in Support of the “4 per 1000” Initiative Using Compost and Stable Biochar from Hazelnut Shells and Sunflower Husks

Effect of temperature and reaction time during solvothermal synthesis of BiOCl on microspheres formation: implications in the photocatalytic oxidation of gallic acid under simulated solar radiation

Photocatalytic activity of P-Fe/activated carbon nanocomposites under artificial solar irradiation

Dual antifungal activity against Candida albicans of copper metallic nanostructures and hierarchical copper oxide marigold‐like nanostructures grown in situ in the culture medium

New insights into oxygen surface coverage and the resulting two-component structure of graphene oxide

Evaluation of Mechanical Properties of Concrete Reinforced with Eucalyptus globulus Bark Fibres

The nature of the active sites of Pd–Ga catalysts in the hydrogenation of CO2 to methanol

K- and Cu-doped CaTiO3-based nanostructured hollow spheres as alternative catalysts to produce fatty acid ethyl esters as potential biodiesel

Anti‐Schistosoma mansoni effects of essential oils and their components

Apigenin as an anticancer agent

Effect of Ni Metal Content on Emulsifying Properties of Ni/CNTox Catalysts for Catalytic Conversion of Furfural in Pickering Emulsions

Biomass-derived furfural conversion over Ni/CNT catalysts at the interface of water-oil emulsion droplets

Selective conversion of biomass-derived furfural to cyclopentanone over carbon nanotube-supported Ni catalyst in Pickering emulsions

Tuning amphiphilic properties of Ni/Carbon nanotubes functionalized catalysts and their effect as emulsion stabilizer for biomass-derived furfural upgrading

Physico-Chemical and Antiadhesive Properties of Poly(Lactic Acid)/Grapevine Cane Extract Films against Food Pathogenic Microorganisms

Corn-Starch-Based Materials Incorporated with Cinnamon Oil Emulsion: Physico-Chemical Characterization and Biological Activity

Enhancing the Membranolytic Activity of Chenopodium quinoa Saponins by Fast Microwave Hydrolysis

Sustained Release of Linezolid from Prepared Hydrogels with Polyvinyl Alcohol and Aliphatic Dicarboxylic Acids of Variable Chain Lengths

A new approach to the mechanism for the acetalization of benzaldehyde over MOF catalysts

Extraction of guaiacol from hydrocarbons as an alternative for the upgraded bio-oil purification: Experimental and computational thermodynamic study

Utilization of industrial by-product fungal biomass from Aspergillus niger and Fusarium culmorum to obtain biosorbents for removal of pesticide and metal ions from aqueous solutions

Synthesis of hierarchical Mn3O4 nanowires on reduced graphene oxide nanoarchitecture as effective pseudocapacitive electrodes for capacitive desalination application

Insights in supported rhenium carbide catalysts for hydroconversion of lignin-derived compounds

Synergy between Ni and Co Nanoparticles Supported on Carbon in Guaiacol Conversion

Relevant aspects of the conversion of guaiacol as a model compound for bio-oil over supported molybdenum oxycarbide catalysts

Development of eco-friendly polyurethane foams based on Lesquerella fendleri (A. Grey) oil-based polyol

Study of supported bimetallic MoRe carbides catalysts for guaiacol conversion

Poly(hydroxybutyrate-co-hydroxyvalerate) microparticles embedded in κ-carrageenan/locust bean gum hydrogel as a dual drug delivery carrier

Assessment of the use of lignosulfonates to separate chalcopyrite and molybdenite by flotation

Relationship between rheological and morphological characteristics of cellulose nanofibrils in dilute dispersions

Solar light-driven photocatalytic degradation of phenol on S-doped nanoporous carbons: The role of functional groups in governing activity and selectivity

Hybrid Material Based on an Amorphous-Carbon Matrix and ZnO/Zn for the Solar Photocatalytic Degradation of Basic Blue 41

Sustainable production of nanoporous carbons: Kinetics and equilibrium studies in the removal of atrazine

Influence of phosphorous upon the formation of DMPO-·OH and POBN-O2· ̄ T spin-trapping adducts in carbon-supported P-promoted Fe-based photocatalysts

Density and Viscosity of Binary Mixtures Composed of Anisole with Dodecane, Hexadecane, Decalin, or 1,4-Dioxane: Experiments and Modeling

Low nanomolar concentrations of a quercetin oxidation product, which naturally occurs in onion peel, protect cells against oxidative damage

Development of liquid chromatography tandem mass spectrometry method to quantify cyclobutane pyrimidine dimer photolyase activity by detection of 15mer oligonucleotide as reaction product

Physical-Chemical Evaluation of Active Food Packaging Material Based on Thermoplastic Starch Loaded with Grape cane Extract

Therapeutic Applications of Curcumin Nanomedicine Formulations in Cardiovascular Diseases

Geometrical characteristics of sugarcane bagasse for being used as fuel in fluidized bed technologies

Formulation of a multifunctional coating based on polyphenols extracted from the Pine radiata bark and functionalized zinc oxide nanoparticles: Evaluation of hydrophobic and anticorrosive properties

Comparative Study of the Antimicrobial Effect of Nanocomposites and Composite Based on Poly(butylene adipate-co-terephthalate) Using Cu and Cu/Cu2O Nanoparticles and CuSO4

Curcumin’s Nanomedicine Formulations for Therapeutic Application in Neurological Diseases

TiO2/S-Doped Carbons Hybrids: Analysis of Their Interfacial and Surface Features

Antidiabetic Potential of Medicinal Plants and Their Active Components

Anacardium Plants: Chemical,Nutritional Composition and Biotechnological Applications

Allicin and health: A comprehensive review

Melatonin in Medicinal and Food Plants: Occurrence, Bioavailability, and Health Potential for Humans

Plants of the genus Spinacia: From bioactive molecules to food and phytopharmacological applications

Phenolic Profile of Grape Canes: Novel Compounds Identified by LC-ESI-LTQ-Orbitrap-MS

Probing the Defect-Induced Magnetocaloric Effect on Ferrite/ Graphene Functional Nanocomposites and their Magnetic Hyperthermia

Unraveling the synergistic influences of graphene and CuO on the structural, photon and phonon properties of graphene:CuO nanocomposites

Influence of different concentrations of Zn-carbonate phase on physical-chemical properties of antimicrobial agar composite films

The consequences of support identity on the oxidative conversion of furfural to maleic anhydride on vanadia catalysts

Kinetics and mechanism of formation of MoO2 by solid state reaction between MoS2 and MoO3

Microencapsulated Bio-Based Rejuvenators for the Self-Healing of Bituminous Materials

Coaxial Spinning of All-Cellulose Systems for Enhanced Toughness: Filaments of Oxidized Nanofibrils Sheathed in Cellulose II Regenerated from a Protic Ionic Liquid

Waste tires pyrolysis kinetics and reaction mechanisms explained by TGA and Py-GC/MS under kinetically-controlled regime

The reduction of Fe-bearing copper slag for its use as a catalyst in carbon oxide hydrogenation to methane. A contribution to sustainable catalysis

The consequences of surface heterogeneity of cobalt nanoparticles on the kinetics of CO methanation

Effects of landcover changes on net primary production (NPP)-based exergy in south-central of Chile

Evaluation of the Water–Energy–Land Nexus (WELN) Using Exergy-Based Indicators: The Chilean Electricity System Case

Life cycle assessment of innovative insulation panels based on eucalyptus bark fibers

Improvement of thermomechanical properties of composite based on T hydroxyapatite functionalized with alkylsilanes in epoxy matrix

Polyphenolic distribution in organs of Argylia radiata, an extremophile plant from Chilean Atacama desert

Prospect of Polysaccharide-Based Materials as Advanced Food Packaging

Chilean crab (Aegla cholchol) as a new source of chitin and chitosan with antifungal properties against Candida spp

Chemical composition and antibacterial activity of red murta (Ugni molinae Turcz.) seeds: an undervalued Chilean resource

Valorization of biomass derivatives through the conversion of phenol over silica-supported Mo-Re oxide catalysts

The promoter effect of Co on the catalytic activity of the Cu oxide active phase supported on Al2O3 in the hydrogenolysis of glycerol

Conversion of guaiacol over metal carbides supported on activated carbon catalysts

Catalytic performance of 2D-Mxene nano-sheets for the hydrodeoxygenation (HDO) of lignin-derived model compounds

Assessment of a Fenton reaction driven by insoluble tannins from pine bark in treating an emergent contaminant

A facile hydrothermal synthesis of CeO2 nanocubes decorated ZnO nanostructures: optical and enhanced photocatalytic properties

Effect of ultrasonic sonication time on the structural, optical and antibacterial properties of ceria nanostructures

Thermal Modification Effect on Supported Cu-Based Activated Carbon Catalyst in Hydrogenolysis of Glycerol

Conversion of levulinic acid using CuO/WO3(x)-Al2O3 catalysts

Catalytic gasification of pine-sawdust: Effect of primary and secondary catalysts

Lanthanum oxide behavior in La2O3-Al2O3 and La2O3-ZrO2 catalysts with application in FAME production

On the active sites for the oxygen reduction reaction catalyzed by graphene-based materials

Ion mobility mass spectrometry of saponin ions

Film Dressings Based on Hydrogels: Simultaneous and Sustained-Release of Bioactive Compounds with Wound Healing Properties

Tailoring the physico-chemical and antimicrobial properties of agar-based films by in situ formation of Cu-mineral phase

Utilization of agro-industrial waste for removal of copper ions from aqueous solutions and mining-wastewater

Insights into the role of Zn and Ga in the hydrogenation of CO2 to methanol over Pd

Novel Biobased Textile Fiber from Colombian Agro-Industrial Waste Fiber

Evaluation of the effects of Ulva sp., Cryptomenia sp., Ciona intestinalis and Heliotropium sp. crude extracts as possible interfering agents on the Autophagocytosis pathway: Preliminary results

C-doped anatase TiO2: Adsorption kinetics and photocatalytic degradation of methylene blue and phenol, and correlations with DFT estimations

Understanding Camellia sinensis using Omics Technologies along with Endophytic Bacteria and Environmental Roles on Metabolism: A Review

Spin density distributions on graphene clusters and ribbons with carbene-like active sites

The effect of molecular weight and hydrolysis degree of poly(vinyl alcohol)(PVA) on the thermal and mechanical properties of poly(lactic acid)/PVA blends

Modulation of optical and photocatalytic properties by morphology and microstrain in hierarchical ceria nanostructures

Nanoparticles of 4,7-dichloro-2-quinolinemethylacrylate-based copolymers and their potential cytotoxic activity on human breast carcinoma cells

Graphene induced band gap widening and luminescence quenching in ceria:graphene nanocomposites

Influence of refluxing time and HMTA on structural and optical properties of rod, prism like ZnO nanostructures

The kinetic effect of H2O pressure on CO hydrogenation over different Rh cluster sizes

Effect of Re content and support in the liquid phase conversion of furfural to furfuryl alcohol and 2-methyl furan over ReOx catalysts

On the environmental and economic issues associated with the forestry residues-to-heat and electricity route in Chile: Sawdust gasification as a case study

Influence of citric acid leaching on the yield and quality of pyrolytic bio-oils from sugarcane residues

Morphological response to salinity, temperature, and pH changes by marine fungus Epicoccum nigrum

Ethylene adsorption onto natural and transition metal modified Chilean zeolite: An operando DRIFTS approach

Production of hydroxyl radicals and their relationship with phenolic compounds in white wines

Environmental impact profile of electricity generation in Chile: A baseline study over two decades

Magnetic Properties and Photocatalytic Behavior of Co Co-doped BiFeO3:Er

Effect of reduced graphene oxide on the structural, optical, adsorption and photocatalytic properties of iron oxide nanoparticles

Solid-state synthesis and characterization of α-Fe2O3@ZnO nanocomposites with enhanced visible light driven photocatalytic activity

Functionalized carbon nanotubes decorated with fluorine-doped titanium dioxide nanoparticles on silicon substrate as template for titanium dioxide film photo-anode grown by chemical vapour deposition

Edible blend films of pectin and poly(ethylene glycol): Preparation and physico-chemical evaluation

Pectin/Carboxymethylcellulose Films as a Potential Food Packaging Material

Effect of phosphorus on the activity of Cu/SiO2 catalysts in the hydrogenolysis of glycerol

Exterior grade plywood adhesives based on pine bark polyphenols and hexamine

Environmentally friendly heterogeneous sol–gel La2O3–Al2O3 mixed oxides for transesterification reaction

Sol–gel La2O3–ZrO2 mixed oxide catalysts for biodiesel production

Oligostilbenoids in Vitis vinifera L. Pinot Noir grape cane extract: Isolation, characterization, in vitro antioxidant capacity and anti-proliferative effect on cancer cells

CO2 methanation over nickel-ZrO2 catalyst supported on carbon nanotubes: A comparison between two impregnation strategies

An Experimental Validated Computational Method for pKa Determination of Substituted 1,2-Dihydroxybenzenes

Py-GC/MS based analysis of the influence of citric acid leaching of sugarcane residues as a pretreatment to fast pyrolysis

Simple and low-cost synthesis of CuO nanosheets for visible-light-driven photocatalytic degradation of textile dyes

Green synthesis of porous Au–Nx-TiO2 nanospheres for solar light induced photocatalytic degradation of diazo and triazo dyes and their eco-toxic effects

The effect of capping agents on the structural and magnetic properties of cobalt ferrite nanoparticles

Controlling the size and magnetic properties of nano CoFe2O4 by microwave assisted co-precipitation method

Ride quality stability of jointed plain-concrete road pavements with short slabs

Load transfer-crack width relation of non-dowelled jointed plain concrete short slabs

Study of the structural order of native starch granules using combined FTIR and XRD analysis

Fast pyrolysis of tannins from pine bark as a renewable source of catechols

An exploratory evaluation of the pulpability of Brachystegia spiciformis and Pericopsis angolensis from the angolan miombo woodlands

Assessment of insecticidal responses of extracts and compounds of Drimys winteri, Lobelia tupa, Viola portalesia and Vestia foetida against the granary weevil Sitophilus granarius

Pectin-based nanocomposite aerogels for potential insulated food packaging application

A general microwave synthesis of metal (Ni, Cu, Zn) selenide nanoparticles and their competitive interaction with human serum albumin

A multispectroscopic and molecular docking investigation of the binding interaction between serum albumins and acid orange dye

Rhodolirium andicola: a new renewable source of alkaloids with acetylcholinesterase inhibitory activity, a study from nature to molecular docking

Design of Ag/ and Pt/TiO2-SiO2 nanomaterials for the photocatalytic degradation of phenol under solar irradiation

Fly Ash Constituent-Silica and Alumina Role in the Synthesis and Characterization of Cordierite Based Ceramics

Studies on NiO-PVA Composite Films for Opto-Electronics and Optical Limiters

Development of a Network-location-model for the Economic Optimization of Local Heating Systems in Urban Chile

Nanostructured carbon materials for enhanced nitrobenzene adsorption: Physical vs. chemical surface properties

Catalytic upgrading of biomass-derived vapors on carbon aerogel-supported Ni: Effect of temperature, metal cluster size and catalyst-to-biomass ratio

Mechanism and structure sensitivity of methanol synthesis from CO2 over SiO2-supported Cu nanoparticles

Antibiotic activity of Emerimicin IV isolated from Emericellopsis minima from Talcahuano Bay, Chile

Lignans in olive stones discarded from the oil industry. Comparison of three extraction methods followed by HPLC-DAD-MS/MS and antioxidant capacity determination

Anatomical and phenological implications of the relationship between Schinus polygama (Cav.) (Cabrera) and the galling insect Calophya rubra (Blanchard)

Factors influencing the morphogenesis of galls induced by Calophya mammifex (Calophyidae) on Schinus polígama(Anacardiaceae) leaves

Optimization of rhein-loaded polymeric nanoparticles using a factorial design and evaluation of the cytotoxic and anti-inflammatory effects

Stability-Indicating Liquid Chromatographic Methods with Photodiode Array Detection and Light Scattering Detection for Simultaneous Determination of Candesartan and Hydrochlorothiazide

Synthesis of maleilated polyflavonoids and lignin as functional bio-based building-blocks

Genetic and Phenotypic Characterization of Indole-Producing Isolates of Pseudomonas syringae pv. actinidiae Obtained From Chilean Kiwifruit Orchards

TEMPO-oxidized cellulose nanofibers as potential Cu(II)adsorbent for wastewater treatment

Sunlight photoactivity of rice husks-derived biogenic silica

Starch films loaded with donut-shaped starch-quercetin microparticles: Characterization and release kinetics

Preparation of starch nanoparticles loaded with quercetin using nanoprecipitation technique

Starch edible films loaded with donut-shaped starch microparticles

Promoter effect of alkalis on CuO/CeO2/carbon nanotubes systems for the PROx reaction

Valorization of Kraft Lignin of Different Molecular Weights as Surfactant Agent for the Oil Industry

Determination of vortioxetine and its degradation product in bulk and tablets, by LC‐DAD and MS/MS methods

Influence of thermoplasticized starch on physical-chemical properties of new biodegradable carriers intended for forest industry

Determination of polymorphic changes in cellulose from Eucalyptus spp. fibres after alkalization

Water-soluble Ru(II)-anethole compounds with promising cytotoxicity toward the human gastric cancer cell line AGS

Pharmacokinetics of low molecular weight phenolic compounds in gerbil plasma after the consumption of calafate berry (Berberis microphylla) extract

Sunlight-Induced photochemical synthesis of Au nanodots on α-Fe2O3@Reduced graphene oxide nanocomposite and their enhanced heterogeneous catalytic properties

Ni/HZSM-5 catalyst preparation by deposition-precipitation. Part 2. Catalytic hydrodeoxygenation reactions of lignin model compounds in organic and aqueous systems

Carbon Aerogel-Supported Nickel and Iron for Gasification Gas Cleaning. Part I: Ammonia Adsorption

Proanthocyanidin-containing polyphenol extracts from fruits prevent the inhibitory effect of hydrogen sulfide on human colonocyte oxygen consumption

Catalytic Ozonation of Toluene Using Chilean Natural Zeolite: The Key Role of Brønsted and Lewis Acid Sites

Fluid dynamic study of mixtures of sugarcane bagasse and sand particles: Minimum fluidization velocity

Prediction of the minimum fluidization velocity of particles of sugarcane bagasse

Electrocrystallization of CaCO3 Crystals Obtained through Phosphorylated Chitin

Changes in epiphytic lichen diversity are associated with air particulate matter levels: The case study of urban areas in Chile

Thermodynamic sorption analysis and glass transition temperature of faba bean (Vicia faba L.) protein

Esterified lignins from Pinus caribaea as bentonite dispersing agents

Condensed tannin-based polyurethane as functional modifier of PLA-composites

Preparation of donut-shaped starch microparticles by aqueous-alcoholic treatment

Extraction of polyphenols from Eucalyptus nitens and Eucalyptus globulus: Experimental kinetics, modeling and evaluation of their antioxidant and antifungical activities

On the nanofibrillation of corn husks and oat hulls fibres

Effect of citric acid leaching on the demineralization and thermal degradation behavior of sugarcane trash and bagasse

Co-firing of coal/biomass blends in a pilot plant facility: A comparative study between Opuntia ficus-indica and Pinus radiata

A Natural Benzofuran from the Patagonic Aleurodiscus vitellinus Fungus has Potent Neuroprotective Properties on a Cellular Model of Amyloid-β Peptide Toxicity

Conversion of guaiacol over different Re active phases supported on CeO2-Al2O3

Evaluation of microextraction by packed sorbent, liquid-liquid microextraction and derivatization pretreatment of diet-derived phenolic acids in plasma by gas

Catalytic Conversion of Model Tars over Carbon-Supported Ni and Fe

Graphene Functionalization: Mechanism of Carboxyl Group Formation

Profiling of Vitis vinifera L. canes (poly) phenolic compounds using comprehensive two-dimensional liquid chromatography.

C18 core-shell column with in-series absorbance and fluorescence detection for simultaneous monitoring of changes in stilbenoid and proanthocyanidin concentrations during grape cane storage

Synthesis and usage of common and functionalized ionic liquids for biogas upgrading

Pseudomonas arsenicoxydans sp nov., an arsenite-oxidizing strain isolated from the Atacama desert

Modelling methanol recovery in wine distillation stills with packing columns

Processing and characterization of starch-based materials from pehuen seeds (Araucaria araucana (Mol) K. Koch)

A topological approach to mass barotropic phenomena in asymmetric mixtures

Soot oxidation in the presence of NO over alumina-supported bimetallic catalysts K–Me (Me = Cu, Co, V)

Catalytic filters for the simultaneous removal of soot and NOx: Effect of CO2 and steam on the exhaust gas of diesel engines

Guaiacol transformation over unsupported molybdenum-based nitride catalysts

Condensed tannin reactivity inhibition by internal rearrengements: detection by Cp-Mas 13c Nmr

Evaluation of ion exchange resins for iron control in copper electro-winning solutions

Effect of sodium sulfite charge in NSSC pulping of E. Globulus

On the mechanism of nascent site deactivation in graphene

The Effect of Clay Type and of Clay–Masterbatch Product in the Preparation of Polypropylene/clay Nanocomposites

Comparative study of maleated polypropylene as a coupling agent for recycled low-density polyethylene/wood flour composites

Hydrodeoxygenation of 2- methoxyphenol over Mo2N catalysts supported on activated carbons

High performance thin layer chromatography determination of cellobiosan and levoglucosan in bio-oil obtained by fast pyrolysis of sawdust

Chromatographic approaches for determination of low-molecular mass aldehydes in bio-oil

Natural zeolite reactivity towards ozone: the role of acid surface sites

Gate voltage control of oxygen diffusion on graphene

Influence of chemical surface characteristics of natural zeolite on catalytic ozone abatement

Methylene blue removal from contaminated waters using heterogeneous catalytic ozonation promoted by natural zeolite: mechanism and kinetic approach

Electrochemical treatment of segregated effluents from the d-stage in ECF Kraft cellulose bleaching

BTX abatement using Chilean natural zeolite: the role of Brønsted acid sites

Municipal solid waste and production of subtitute natural gas and electricity as energy alternatives

Comparison of the composition of Pinus radiata bark extracts obtained at bench- and pilot-scales

Physical, chemical and mechanical properties of pehuen husk and its pehuen-starch based composites

Roasting kinetics of high-arsenic copper concentrates

Structural importance of Stone–Thrower–Wales defects in rolled and flat graphenes from surface-enhanced Raman scattering

Comparison of alumina- and SBA-15-supported molybdenum nitride catalysts for hydrodeoxygenation of guaiacol

Hydrodeoxygenation of Guaiacol over Carbon-Supported Molybdenum Nitride Catalysts: Effects of Nitriding Methods & Support Properties

Inhibitory Activities on Mammalian Central Nervous System Receptors and Computational Studies of Three Sesquiterpene Lactones from Coriaria ruscifolia subsp ruscifolia

Oxygen migration on the graphene surface. 1. Origin of epoxide groups

Oxygen migration on the graphene surface. 2. Thermochemistry of oxygen diffusion (hopping)

Effect of the bench scale extraction conditions on pinus radiata bark extract yield, antioxidant properties and composition

Phytotoxic effect of paper pulp sludge on Alfisol soil

Poly(ethylene glycol) as a compatibilizer and plasticizer of poly(lactic acid)/clay nanocomposites

PVC/copper oxide composites and their effect on bacterial adherence

Preparation of poly(vinyl chloride)/copper nanocomposite films with reduced bacterial adhesion

Preferential adhesion of silver nanoparticles onto crystal faces of α-cyclodextrin/carboxylic acids inclusion compounds

Advanced Electrochemical Oxidation of Ultrafiltration Permeates from Cellulose Bleaching Effluents

Similarities and differences in O2 chemisorption on graphene nanoribbon vs. carbon nanotube

Chemical defense responses in Eucalyptus globulus (Labill) Plants

Induction of defensive responses in Eucalyptus globulus (Labill) plants, against Ctenarytaina eucalypti (Maskell) (Hemiptera: Psyllidae)

Pyrolyzed phthalocyanines as surrogate carbon catalysts: Initial insights into oxygen-transfer mechanisms

Role of surface hydroxyl groups of acid-treated natural zeolite on the heterogeneous catalytic ozonation of methylene blue contaminated waters

Natural zeolite reactivity towards ozone: The role of compensating cations

Influence of Volcanic Sand Surface Hydroxyl Groups on the Heterogeneous Catalytic Ozonation of Methylene Blue Contaminated Waters

Life cycle inventory of pine and eucalyptus cellulose production in chile: effect of process modifications

Impact of ozone treatment on activated carbon surface properties

On the methane adsorption capacity of activated carbons: in search of a correlation with adsorbent properties

Tribromophenol and Pentachlorophenol uptake from Sawdust to Horticultural Products

Active Sites in Graphene and the Mechanism of CO2 Formation in Carbon Oxidation

Thermogravimetric study of interactions in the pyrolysis of coal-biomass blends with Radiata pine sawdust

Catalytic ozone aqueous decomposition promoted by natural zeolite and volcanic sand

Isolation of Arsenite-Oxidizing Bacteria from Arsenic-Enriched Sediments from Camarones River in Northern Chile

Anthocyanins that confer characteristic color to red copihue flowers (Lapageria rosea)

Detoxification of Waste Water Contaminated with Imidacloprid using Homogeneous and Heterogeneous Photo-Fenton Processes

Arsenic Mobilization by Epilithic Bacterial Communities Associated with Volcanic Rocks from Camarones River, Atacama Desert, Northern Chile

Effect of Zeolite Chemical Surface Properties on Catalytic Ozonation of Methylene Blue Contaminated Waters

Kinetic study of Imidacloprid Removal by Advanced Oxidation Based on Photo-Fenton Process

Heterogeneous Catalytic Ozonation of Cationic Dyes Using Volcanic Sand

Kinetics and Reaction Mechanisms of High Temperature flash Oxidation of Molybdenite

About the Active Phases of KNO3/Mgo for Catalytic Soot Combustion

Effect of Ca-Substitution in La1-Xcaxfeo3 Perovskites on the Catalytic Activity for Soot Combustion

Effect of Ag addition on the thermal stability and catalytic properties of LaFeO3 perovskite

Alternatives for Sample Pre-Treatment and HPLC Determination of Ochratoxin a in Red Wine Using Fluorescence Detection

Polyphenols and Antioxidant Activity of Calafate (Berberis Microphylla) Fruits and Other Native Berries From Southern Chile

Insight on the Promoting Effect of Zr and Ti on the Catalytic Properties of Rh/SiO2 for Partial Oxidation of Methane

Fast Pyrolysis of Lignins

Relevance of Sulfiding Pretreatment on the Performance of Re/Zro2 and Re/Zro2-Sulfated Catalysts for the Hydrodeoxygenation of Guayacol

Synthetic-Resin-Free Wood Panel Adhesives from Mixed Low Molecular Mass Lignin and Tannin

Effect of Layers Relative Moisture Content on the IB Strength of Pine Tannin Bonded Particleboard

Wood Panel Adhesives from Low Molecular Mass Lignin and Tannin Without Synthetic Resins

MALDI-TOF and 13C NMR characterization of maritime pine industrial tannin extract

Gluten Protein Adhesives for Wood Panels

Extraction of Condensed Tannins From Grape Pomance for use as Wood Adhesive

Extraction, Characterization and Utilization of Organosolv Miscanthus Lignin for the Conception of Environmentally Friendly Mixed Tannin/Lignin Wood Resins

Study on Lignin-Glyoxal Reaction by Maldi-Tof and CP-Mass 13CNMR

Accurate Stress Computation in Plane Strain Tensile Tests for Sheet Metal Using Experimental Data

Recovery of Molybdenum from Roasted Copper Slags

Antimicrobial effects of extracts from Chilean plants of Lauraceae and Atherospermataceae families

Gold and Silver Cyanidation from a Residue Produced by Leaching Dead-Roasted Copper White Metal

Herbicides induce change in metabolic and genetic diversity of bacterial community from a cold oligotrophic lake

Effect of virgin heterophasic PP copolymer content on moisture absorption, thermal and mechanical properties of recycled polyethylene wood flour composites

Thermodynamic predictions of performance of a bagasse integrated gasification combined cycle under quasi-equilibrium conditions

Separation of lignocellulosic components in acetic acid media and evaluation of applications

Energetic viability of wheat straw fractionation by Acetosolv process

Lemon grass (Cymbopogon citratus (D.C) Stapf) polyphenols protect human umbilical vein endothelial cell (HUVECs) from oxidative damage induced by high glucose, hydrogen peroxide and oxidised low-density lipoprotein

Optimization of mechanical properties of Al-metal matrix composite produced by direct fusion of beverage cans

Pyrolysis of pre-treated tannins obtained from radiata pine bark

Nir spectroscopy applied to the characterization and selection of pre-treated materials from multiple lignocellulosic resources for bioethanol production

Observed kinetic parameters during the torrefaction of red oak (Quercus rubra) in a pilot rotary kiln reactor

Torrefaction kinetics of red oak (Quercus rubra) in a fluidized reactor

Growth responses of loblolly pine in the southeast United States to midrotation applications of nitrogen, phosphorus, potassium, and micronutrients

Ni nanoparticles prepared from Ce substituted LaNiO3 for guaiacol conversion

The effect of multiwall carbon nanotubes on the in-plane shear behavior of epoxy glass fiber reinforced composites

Insights into dynamic surface processes occurring in Rh supported on Zr-grafted gamma-Al2O3 during dry reforming of methane

Effect of hierarchical porosity and fluorination on the catalytic properties of zeolite beta for glycerol etherification

Influence of post-pruning storage on stilbenoid levels in Vitis vinifera L. canes

The use of water-extractable Cu, Mo, Zn, As, Pb concentrations and automated mineral analysis of flue dust particles as tools for impact studies in topsoils exposed to past emissions of a Cu-smelter

Effect of P content in the conversion of guaiacol over Mo/Al2O3 catalysts

Effect of water on the conversions of 2-methoxyphenol and phenol as bio-oil model compounds over ReS2/SiO2 catalyst

Oxidative regeneration of toluene-saturated natural zeolite by gaseous ozone: The influence of zeolite chemical surface characteristics

Catalysis: an old but new challenge for graphene-based materials

Solvothermal synthesis of BiOI microspheres: Effect of the reaction time on the morphology and photocatalytic activity

The influence of carbon fabric weave on the in-plane shear mechanical performance of epoxy fiber-reinforced laminates

Phenylmercury degradation by heterogeneous photocatalysis assisted by UV-A light

Development of a bienzymatic amperometric biosensor to determine uric acid in human serum based on mesoporous silica (MCM-41) for enzyme immobilization

Leaching kinetics of enargite in alkaline sodium sulphide solutions

Soot oxidation on silver-substituted LaMn0.9Co0.1O3 perovskites

Acetylation of bleached kraft pulp: Effect of xylan content on properties of acetylated compounds

Maleic anhydride polypropylene modified cellulose nanofibril polypropylene nanocomposites with enhanced impact strength

Preparation and physical characterization of nanocomposites of PLA/layered silicates

Fast pyrolysis of low and high ash paper waste sludge: Influence of reactor temperature and pellet size

Effect of viscosity on the porosity of granular materials in the moving bed washing process

Anthocyanin profiles in south Patagonian wild berries by HPLC-DAD-ESI-MS/MS

Hydrodeoxygenation of guaicol over ReS2/activated carbon catalysts. Support and Re loading effect

Isolation and structure elucidation of anthocyanidin 3,7-β-O-diglucosides and caffeoyl-glucaric acids from calafate (Berberis mycrophylla G. Forst) berries

Distribution and sources of phytosterols in coastal and river sediments of south-central Chile

Chemical remediation of an agricultural soil: a case study of the tsunami-affected area of Chile

Treatment of a mixture of chloromethoxyphenols in hypochlorite medium by electrochemical AOPs as an alternative for the remediation of pulp and paper mill process waters

Low frequency ultrasound (42 kHz) assisted degradation of Acid Blue 113 in the presence of visible light driven rare earth nanoclusters loaded TiO2 nanophotocatalysts

Magnesia-supported potassium oxide catalysts for soot combustion: effect of Fe addition on the catalyst activity and stability

Burnout synergic or inhibiting effects in combustion of coal-sawdust blends

Vacuum pyrolysis of agricultural wastes and adsorptive criteria description of biochars governed by the presence of oxides

Control of released volatile organic compounds from industrial facilities using natural and acid treated mordenites: The role of acidic surface sites in the adsorption mechanism

Oxidative degradation of sulfathiazole by Fenton and photo-Fenton reactions

Continuous converting of copper matte to blister copper in a high intensity molten layer reactor

Bio-oil production from biomass by flash pyrolysis in a three stage fluidized bed reactors system

Photonic efficiency of the photodegradation of paracetamol in water by the photo-Fenton process

New assessment of organic mercury formation of highly polluted sediments in the Lenga estuary, Chile

Hydrodeoxygenation of 2-methoxyphenol over different Re active phases supported on SiO2 catalysts

Inherent process variations between fast pyrolysis technologies: A case study on Eucalyptus grandis

Eco-Friendly Heterogeneous Photocatalysis on Biochar-Based Materials Under Solar Irradiation

Morphological effects at radicle level by direct contact of invasive Acacia dealbata Link

Modification of condensed tannins: from polyphenol chemistry to materials engineering

Low frequency ultrasound assisted sequential and co-precipitation syntheses of nanoporous RE (Gd and Sm) doped cerium oxide

Hydroxypropyl tannin from Pinus pinaster bark as polyol source in urethane chemistry

Lignocellulose pyrolysis with condensable volatiles quantification by thermogravimetric analysis—Thermal desorption/gas chromatography–mass spectrometry method

Energy conversion assessment of vacuum, slow and fast pyrolysis processes for low and high ash paper waste sludge

Effect of Ni Loading on Lanthanide (La and Ce) Promoted γ-Al2O3 Catalysts Applied to Ethanol Steam Reforming

Chemical composition and thermal properties of Chilean Araucaria araucana starch

Quantitative determination of rivastigmine from a new biodegradable microparticulate system by high-performance thin-layer chromatography

Life-Cycle Assessment of coal–biomass based electricity in Chile: Focus on using raw vs torrefied wood

Membrane treatment of alkaline bleaching effluents from elementary chlorine free kraft softwood cellulose production

Treatment of cellulose bleaching effluents and their filtration permeates by anodic oxidation with H2O2 production

Torrefaction of Pinus radiata and Eucalyptus globulus: A combined experimental and modeling approach to process synthesis

An update on the mechanism of the graphene–NO reaction

Evaluation of the Potential of Grape Canes as a Source of Bioactive Stilbenoids

Structural and chemical modifications of typical South African biomasses during torrefaction

Fast pyrolysis of lignin-coated radiata pine

A modelling approach to the techno-economics of Biomass-to-SNG/Methanol systems: Standalone vs Integrated topologies

Comprehensive Characterization of Sugarcane Bagasse Ash for Its Use as an Adsorbent

Synthesis of palladium nanoparticles on carbon nanotubes and graphene for the chemoselective hydrogenation of para-chloronitrobenzene

Chemical-activated carbons from peach stones for the adsorption of emerging contaminants in aqueous solutions

Poly([(2-methacryloyloxy)ethyl]trimethylammonium chloride): synthesis, characterization, and removal properties of As(V)

Kinetic study of the conversion of 2-methoxyphenol over supported Re catalysts: Sulfide and oxide state

Insights in the mechanism of deposition and growth of RuO2 colloidal nanoparticles over alumina. Implications on the activity for ammonia synthesis

Removal of Methylene Blue by Adsorption on Mesoporous Carbon from Peach Stones

Influence of in vitro growth conditions on the photosynthesis and survival of Castanea sativa plantlets during ex vitro transfer

Biodegradation of roxarsone by a bacterial community of underground water and its toxic impact

Biodegradation of Tributyltin (TBT) by Extremophile Bacteria from Atacama Desert and Speciation of Tin By-products

Capreomycin oleate microparticles for intramuscular administration: Preparation, in vitro release and preliminary in vivo evaluation

Evaluation of the fill yarns effect on the out-of-plane compressive fatigue behavior for an unidirectional glass fiber reinforced epoxy composite

A new synthesis route of ZnO nanonails via microwave plasma-assisted chemical vapor deposition

FE modeling of the cooling and tempering steps of bimetallic rolling mill rolls

Effects and identification of chemical compounds released from the invasive Acacia dealbata Link

Preliminary biorefinery process proposal for protein and biofuels recovery from microalgae

Application of high silica zeolite ZSM-5 in a hybrid treatment process based on sequential adsorption and ozonation for VOCs elimination

Improved stability of Ni/Al2O3 catalysts by effect of promoters (La2O3, CeO2) for ethanol steam-reforming reaction

Exergoeconomic evaluation of an ethanol-fueled solid oxide fuel cell power plant

Torrefaction of wood and bark from Eucalyptus globulus and Eucalyptus nitens: Focus on volatile evolution vs feasible temperatures

Kinetics of oxygen transfer reactions on the graphene surface: Part I. NO vs. O2

Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials

Quality and high yield synthesis of Ag nanowires by microwave-assisted hydrothermal method

Kinetic and in situ FTIR study of CO methanation on a Rh/Al2O3 catalyst

The Chilean wild raspberry (Rubus geoides Sm.) increases intracellular GSH content and protects against H2O2 and methylglyoxal-induced damage in AGS cells

BiOI microspheres for photocatalytic degradation of gallic acid

Thermochemical properties of cellulose acetate blends with acetosolv and sawdust lignin: A comparative study

Fingerprinting of strong spermatogenesis steroidal saponins in male flowers of Phoenix dactylifera (Date Palm) by LC-ESI-MS

Elucidating the role of ammonia-based salts on the preparation of cellulose-derived carbon aerogels

Dry reforming of methane on grafted-supported Rh catalysts: effect of the metal-support interaction on the reaction rate

Using Apparent Activation Energy as a Reactivity Criterion for Biomass Pyrolysis

Exergoeconomic valuation of a waste-based integrated combined cycle (WICC) for heat and power production

Effect of A-site deficiency in LaMn0.9Co0.1O3 perovskites on their catalytic performance for soot combustion

Polysaccharide nanomaterial reinforced starch nanocomposites: A review

New concepts in low-temperature catalytic hydrogenation and their implications for process intensification

Mild hydroxypropylation of polyflavonoids obtained under pilot-plant scale

Bark polyflavonoids from Pinus radiata as functional building-blocks for polylactic acid (PLA)-based green composites

Pyrolysis and combustion of municipal solid wastes: Evaluation of synergistic effects using TGA-MS

Synthesis and characterization of polyhydroxybutyrate-co-hydroxyvalerate nanoparticles for encapsulation of quercetin

High surface area microporous carbons as photoreactors for the catalytic photodegradation of methylene blue under UV–vis irradiation

Nanostructured hybrid TiO2-C for the photocatalytic conversion of phenol

Degradation of Organoarsenicals by Heterogeneous Photocatalysis using ZnO, TiO2 and UVA

Cu nanoparticles/PVC Composites: Thermal, Rheological, and Antibacterial Properties

Processing and characterization of polyols plasticized-starchreinforced with microcrystalline cellulose

Valorisation of paper waste sludge via fermentation and pyrolysis

Hydroxycinnamic acid derivatives and flavonol profiles of maqui (Aristotelia chilensis) fruits

Hydroxyl radical production by a heterogeneous Fenton reaction supported in insoluble tannin from bark of Pinus radiata

Development of an analytical method for the main organic compounds derived from thermochemical conversion of biomass

On the structural and reactivity differences between biomass- and coal-derived chars

Horse chestnut (Aesculus hippocastanum L.) starch: Basic physico-chemical characteristics and use as thermoplastic material

Selective production of formic acid by wet oxidation of aqueous- phase bio-oil

Photochemical reactivity of apical oxygen in KSr2Nb5O15 materials for environmental remediation under UV irradiation

In situ catalytic fast pyrolysis of crude and torrefied Eucalyptus globulus using carbon aerogel-supported catalysts

Cytotoxic triterpenoids isolated from sweet chestnut heartwood (Castanea sativa) and their health benefits implication

Steam torrefaction of Eucalyptus globulus for producing black pellets: A pilot-scale experience

Reagents for Bromination; Application in the Synthesis of Diterpenes, Sesquiterpenes and Bioactive Compounds

Structure-reactivity relationship in pyrolysis of plastics. A comparison with natural polymers

Development and characterization of polyvinyl alcohol stabilized polylactic acid/ZnO nanocomposites

Development of TiO2-C photocatalysts for solar treatment of polluted water

Triterpenoid Components from Oak Heartwood (Quercus robur) and Their Potential Health Benefits

Catalytic hydrodeoxygenation of anisole over ReMoOx/TiO2 catalysts

Toxicological features of maleilated polyflavonoids from Pinus radiata (D. Don.) as potential functional additives for biomaterials design

Condensed tannins from pine bark: A novel wood surface modifierassisted by laccase

Maleinated polyflavonoids and lignin as functional additives for three kinds of thermoplastics

Hydrogen transfer and quinone/hydroquinone transitions in graphene-based materials

Ni/HZSM-5 catalyst preparation by deposition-precipitation. Part 1. Effect of nickel loading and preparation conditions on catalyst properties

Conversion of guaiacol over supported ReOx catalysts: Support and metal loading effect

A study of the hydrodeoxygenation of anisole over Re-MoOx/TiO2 catalyst

Exergoenvironmental analysis of a waste-based Integrated Combined Cycle (WICC) for heat and power production

Role of oxygen-containing functional surface groups of activated carbons on the elimination of 2-hydroxybenzothiazole from waters in A hybrid heterogeneous ozonation system

Differences in Vvufgt and VvmybA1 Gene Expression Levels and Phenolic Composition in Table Grape (Vitis vinifera L.) ‘Red Globe’ and Its Somaclonal Variant ‘Pink Globe’

Catalytic performance of ordered mesoporous carbons modified with lanthanides in dry methane reforming

Microwave-assisted synthesis of C-doped TiO2 and ZnO hybrid nanostructured materials as quantum-dots sensitized solar cells

Catalytic consequences of Ga promotion on Cu for CO2 hydrogenation to methanol

Mechanism and kinetic parameters of glucose and fructose dehydration to 5-hydroxymethylfurfural over solid phosphate catalysts in water

Morphological and structural changes of starch during processing by melt blending

Catalytic combustion of soot. Effects of added alkali metals on CaO-MgO physical mixtures

Determination of pentachlorophenol and tribromophenol in sawdust by ultrasound-assisted extraction and MEKC

Imidacloprid oxidation by photo-Fenton reaction

Effect of temperature on Imidacloprid oxidation by homogeneous photo-Fenton processes

Determination of tribromophebnol and pentachlorophenol and its metabolite pentachloroanisol in Asparagus officinalis by gas chromatography/mass spectrometry.