Bioenergy

Molybdenite Concentrate Purification by a Continuous Sulfation-Leaching Process

A Study of Bioenergy Production from Chilean Tessaria absinthioides

Nanostructured KxNa1-xNbO3 hollow spheres as potential materials for the photocatalytic treatment of polluted water

Using tungstophosphoric acid-modified CeO2, TiO2, and SiO2 catalysts to promote secondary reactions leading to aromatics during waste tire pyrolysis

Catalytic pyrolysis of used tires on noble-metal-based catalysts to obtain high-value chemicals: Reaction pathways

Reductive amination of phenol over Pd-based catalysts: elucidating the role of the support and metal nanoparticle size

Dataset on the reductive amination of phenolics with cyclohexylamine over Rh/C and Pd/C: Catalysts characterization and reaction performance

Photocatalytic Performance of Carbon-Containing CuMo-Based Catalysts under Sunlight Illumination

Performance of a C-containing Cu-based photocatalyst for the degradation of tartrazine: Comparison of performance in a slurry and CPC photoreactor under artificial and natural solar light

Isotopic transient kinetic analysis of CO2 hydrogenation to methanol on Cu/SiO2 promoted by Ga and Zn

Ammonia Removal in Activated Carbons Prepared from Olive Oil Industry Waste

Effect of rejuvenating oil type on the synthesis and properties of alginate-based polynuclear capsules for asphalt self-healing

Production of limonene from waste tires via catalytic fast pyrolysis: a statistical–based screening on Ni‐, Pd‐, Co‐, and Fe‐supported catalysts

Comparative Study of Three Dyes’ Adsorption onto Activated Carbon from Chenopodium quinoa Willd and Quillaja Saponaria

Performance of CuO/ZnO/AL2O3 catalysts undergoing various water gas displacement reaction cycles

Novel capsules for asphalt self-healing containing bio-oil from biomass waste

Photocatalytic Turnover Number for Nanoporous Carbon-based Remediation of Polluted Water

Influence of lignin distribution, physicochemical characteristics and microstructure on the quality of biofuel pellets made from four different types of biomass

Fast Pyrolysis of Hemicelluloses into Short-Chain Acids: An Investigation on Concerted Mechanisms

Co-pyrolysis of coal and raw/torrefied biomass: A review on chemistry, kinetics and implementation

Kinetic and structural understanding of bulk and supported vanadium-based catalysts for furfural oxidation to maleic anhydride

Thermodynamic and Kinetic Mechanisms of Bornite/Chalcopyrite/Magnetite Formation During Partial Roasting of High-Arsenic Copper Concentrates

Partial Roasting of High-Arsenic Copper Concentrates

Insights into Hydrodeoxygenation of Furfural and Guaiacol Mixture: Experimental and Theoretical Studies

Effect of Ni Metal Content on Emulsifying Properties of Ni/CNTox Catalysts for Catalytic Conversion of Furfural in Pickering Emulsions

Aerogeles de óxido de grafeno reducido dopados con metales de transición para captura de H2

Efecto del soporte en la actividad de catalizadores de vanadio en la oxidación parcial de furfural a anhídrido maleico

Valorización del Ácido Succínico sobre catalizadores de Ni and Co: Efecto de los metales y los soportes

Noble Metal-Free Graphene-Based Photocatalysis: Defining a New Turnover Number for Water Remediation ́s Processes

Efecto del contenido metálico en la hidrogenación de furfural sobre catalizadores de Ni/CNTox ensamblados en la interfase de emulsiones water/oil

Estudios cinéticos para la reacción de acetilación de benzaldehído catalizada por Metal Organic Frameworks

Catalizadores VPO para la Oxidación Parcial de Furfural a Anhídrido Maleico

Catalizadores de Carburos de Renio para la HDO de Guaiacol: Efecto del Soporte

Cobaltitas de lantano sustituidas parcialmente por Ca y Sr en el sitio A para ser empleadas como catalizadores en la conversión del ácido succínico

Conversión de Guayacol con Catalizadores Core@Shell basados en Co

Conversion of succinic acid over Ni and Co catalysts

Impact of physical and physicochemical properties of supplementary cementitious materials on structural build-up of cement-based pastes

The Cramer’s rule for the parametrization of phenol and its hydroxylated byproducts: UV spectroscopy vs. high performance liquid chromatography

Carbon Sequestration in Support of the “4 per 1000” Initiative Using Compost and Stable Biochar from Hazelnut Shells and Sunflower Husks

Photocatalytic activity of P-Fe/activated carbon nanocomposites under artificial solar irradiation

The nature of the active sites of Pd–Ga catalysts in the hydrogenation of CO2 to methanol

K- and Cu-doped CaTiO3-based nanostructured hollow spheres as alternative catalysts to produce fatty acid ethyl esters as potential biodiesel

Effect of Ni Metal Content on Emulsifying Properties of Ni/CNTox Catalysts for Catalytic Conversion of Furfural in Pickering Emulsions

Biomass-derived furfural conversion over Ni/CNT catalysts at the interface of water-oil emulsion droplets

Selective conversion of biomass-derived furfural to cyclopentanone over carbon nanotube-supported Ni catalyst in Pickering emulsions

Tuning amphiphilic properties of Ni/Carbon nanotubes functionalized catalysts and their effect as emulsion stabilizer for biomass-derived furfural upgrading

A new approach to the mechanism for the acetalization of benzaldehyde over MOF catalysts

Extraction of guaiacol from hydrocarbons as an alternative for the upgraded bio-oil purification: Experimental and computational thermodynamic study

Insights in supported rhenium carbide catalysts for hydroconversion of lignin-derived compounds

Synergy between Ni and Co Nanoparticles Supported on Carbon in Guaiacol Conversion

Relevant aspects of the conversion of guaiacol as a model compound for bio-oil over supported molybdenum oxycarbide catalysts

CQDs for the Sustainable Production of Solar Fuels and Chemicals

Photocatalytic degradation of tartrazine using C-doped Cu-/Mo-based catalysts under solar irradiation

Carbon xerogels for the removal and photodegradation of Yellow-5 under solar irradiation

Photocatalytic activity of semiconductor-free, tannin-derived mesostructured carbons

H2 production on 1D and 2D Carbon-containing Fe-, Co- and Ni-based foamy catalysts

Performance of Bi2WO6/carbon catalysts under real solar conditions in a CPC photoreactor.

Optimizing Carbons for Photocatalytic Degradation of Organic Pollutants

Xerogels for the study of porosity in photochemistry: Adsorption and photodegradation of yellow-5.

Analytical methodology for the determination and separation of phenolic compounds in the bio-oil

Anomalies in Adsorption and photocatalytic degradation of rhodamine-B on tannin-derived ordered mesoporous carbon.

Pollutants removal by photocatalysis on tannin-derived ordered mesoporous carbons.

Determining the role of pore size in carbons for the photocatalytic degradation of organic pollutants under solar irradiation.

Carbon-Containing Cu- and Mo-Based photocatalysts for the yellow 5 photodegradation

Biomass-Derivative Molecules for the Sustainable Synthesis of Carbon-Doped High-Performance Nanostructured Materials

Defining a New Surface Reaction-Rate Constant for C-Based Photocatalysts

Breakthrough curves of the extraction of catechol from bio-oil by SPE-HPLC

Radiata pine bark pyrolysis-oil fractionation and its potential applications

Study of supported bimetallic MoRe carbides catalysts for guaiacol conversion

Solar light-driven photocatalytic degradation of phenol on S-doped nanoporous carbons: The role of functional groups in governing activity and selectivity

Hybrid Material Based on an Amorphous-Carbon Matrix and ZnO/Zn for the Solar Photocatalytic Degradation of Basic Blue 41

Sustainable production of nanoporous carbons: Kinetics and equilibrium studies in the removal of atrazine

Influence of phosphorous upon the formation of DMPO-·OH and POBN-O2· ̄ T spin-trapping adducts in carbon-supported P-promoted Fe-based photocatalysts

Density and Viscosity of Binary Mixtures Composed of Anisole with Dodecane, Hexadecane, Decalin, or 1,4-Dioxane: Experiments and Modeling

Geometrical characteristics of sugarcane bagasse for being used as fuel in fluidized bed technologies

TiO2/S-Doped Carbons Hybrids: Analysis of Their Interfacial and Surface Features

The consequences of support identity on the oxidative conversion of furfural to maleic anhydride on vanadia catalysts

Kinetics and mechanism of formation of MoO2 by solid state reaction between MoS2 and MoO3

Microencapsulated Bio-Based Rejuvenators for the Self-Healing of Bituminous Materials

Coaxial Spinning of All-Cellulose Systems for Enhanced Toughness: Filaments of Oxidized Nanofibrils Sheathed in Cellulose II Regenerated from a Protic Ionic Liquid

Waste tires pyrolysis kinetics and reaction mechanisms explained by TGA and Py-GC/MS under kinetically-controlled regime

The reduction of Fe-bearing copper slag for its use as a catalyst in carbon oxide hydrogenation to methane. A contribution to sustainable catalysis

The consequences of surface heterogeneity of cobalt nanoparticles on the kinetics of CO methanation

Evaluation of the Water–Energy–Land Nexus (WELN) Using Exergy-Based Indicators: The Chilean Electricity System Case

Valorization of biomass derivatives through the conversion of phenol over silica-supported Mo-Re oxide catalysts

The promoter effect of Co on the catalytic activity of the Cu oxide active phase supported on Al2O3 in the hydrogenolysis of glycerol

Conversion of guaiacol over metal carbides supported on activated carbon catalysts

Catalytic performance of 2D-Mxene nano-sheets for the hydrodeoxygenation (HDO) of lignin-derived model compounds

Assessment of a Fenton reaction driven by insoluble tannins from pine bark in treating an emergent contaminant

Thermal Modification Effect on Supported Cu-Based Activated Carbon Catalyst in Hydrogenolysis of Glycerol

Conversion of levulinic acid using CuO/WO3(x)-Al2O3 catalysts

Catalytic gasification of pine-sawdust: Effect of primary and secondary catalysts

Lanthanum oxide behavior in La2O3-Al2O3 and La2O3-ZrO2 catalysts with application in FAME production

Insights into the role of Zn and Ga in the hydrogenation of CO2 to methanol over Pd

Effect of the average cobalt cluster size on its activity for carbon monoxide methanation

Use of a steel waste as a catalyst in the hydrogenation of CO – kinetic study

Enhancing aromatics production from waste tires pyrolyzed over HZSM-5 and Ni/HZSM-5: A Py/GCMS study

Catalysts based on cellulose-derived carbon aerogels for the cleaning and upgrading of gasification product gas

Sustainable synthesis of Pd/C-doped TiO2 catalyst for the Selective Phenol Hydrogenation

Evaluation of the potential of solar technology in wastewater treatment

Carbon-based photocatalysts to produce solar fuels and chemicals from biomass-derived molecules

Nanoporous carbons for the enviromental remediation and solar fuels production

Exploring the photocatalytic activity of biogenic silica under simulated solar light

Correlations between the chemical nature of Fe-containing phases in P-Fe/C nanocomposites and photocatalytic activity under solar irradiation

Influence of bio-precursor upon the adsorption and solar photodegradation of methylene blue on TiO2@C

Sunlight photoactivity of titania/biogenic silica catalysts for water treatment

Enhanced TiO2 photoactivity under solar light using biogenic carbon additives

Influence of PO4 3-/Fe3+ complexes formed on nanoporous carbons upon the photocatalytic degradation of methylene blue

Activated carbon-based P-Fe nanocomposites for the adsorption and photodegradation of methylene blue under solar radiation

Nanoporous carbons for solar fuels production

Photocatalytic valorization of furfuryl alcohol, 5-HMF and glycerol on TiO2-C and Cu@TiO2-C under simulated solar irradiation

Carbon aerogel-supported Ni for upgrading biomass-derived vapors: A Py-GC/MS approach

C-doped anatase TiO2: Adsorption kinetics and photocatalytic degradation of methylene blue and phenol, and correlations with DFT estimations

The kinetic effect of H2O pressure on CO hydrogenation over different Rh cluster sizes

Effect of Re content and support in the liquid phase conversion of furfural to furfuryl alcohol and 2-methyl furan over ReOx catalysts

On the environmental and economic issues associated with the forestry residues-to-heat and electricity route in Chile: Sawdust gasification as a case study

Influence of citric acid leaching on the yield and quality of pyrolytic bio-oils from sugarcane residues

Ethylene adsorption onto natural and transition metal modified Chilean zeolite: An operando DRIFTS approach

Environmental impact profile of electricity generation in Chile: A baseline study over two decades

Export of regular and Torrefied wood pellets from Chile to Europe and Asia

Effect of phosphorus on the activity of Cu/SiO2 catalysts in the hydrogenolysis of glycerol

Environmentally friendly heterogeneous sol–gel La2O3–Al2O3 mixed oxides for transesterification reaction

Sol–gel La2O3–ZrO2 mixed oxide catalysts for biodiesel production

CO2 methanation over nickel-ZrO2 catalyst supported on carbon nanotubes: A comparison between two impregnation strategies

An Experimental Validated Computational Method for pKa Determination of Substituted 1,2-Dihydroxybenzenes

Py-GC/MS based analysis of the influence of citric acid leaching of sugarcane residues as a pretreatment to fast pyrolysis

Fast pyrolysis of tannins from pine bark as a renewable source of catechols

Design of Ag/ and Pt/TiO2-SiO2 nanomaterials for the photocatalytic degradation of phenol under solar irradiation

Development of a Network-location-model for the Economic Optimization of Local Heating Systems in Urban Chile

Nanostructured carbon materials for enhanced nitrobenzene adsorption: Physical vs. chemical surface properties

Catalytic upgrading of biomass-derived vapors on carbon aerogel-supported Ni: Effect of temperature, metal cluster size and catalyst-to-biomass ratio

Mechanism and structure sensitivity of methanol synthesis from CO2 over SiO2-supported Cu nanoparticles

Sunlight photoactivity of rice husks-derived biogenic silica

Promoter effect of alkalis on CuO/CeO2/carbon nanotubes systems for the PROx reaction

Water-soluble Ru(II)-anethole compounds with promising cytotoxicity toward the human gastric cancer cell line AGS

Ni/HZSM-5 catalyst preparation by deposition-precipitation. Part 2. Catalytic hydrodeoxygenation reactions of lignin model compounds in organic and aqueous systems

Carbon Aerogel-Supported Nickel and Iron for Gasification Gas Cleaning. Part I: Ammonia Adsorption

CO methanation by means of Fe catalysts supported in activated carbon

Textural and surface chemical characterization of carbon materials

Thermodynamics and kinetics of graphene reactions with H2O and CO2

Nanoporous Carbons and Hybrid Materials for Environmental Remediation and Production of Solar Fuels

Correlations between Theoretical and Experimental Results in C-doped TiO2 Nanostructured Materials

Carbon-based Catalysts and Photocatalysts for the Integrated Photo-Biorefinery

Eco-Friendly Methodology for the Synthesis of nanoporous graphene base catalytuc membrane reactors

Design of a marabou torrefaction plant for energy purposes

Síntesis asistida por microondas de materiales híbridos nanoestructurados de TiO2 y ZnO dopados con C para celdas solares sensibilizadas

Fluid dynamic study of mixtures of sugarcane bagasse and sand particles: Minimum fluidization velocity

Prediction of the minimum fluidization velocity of particles of sugarcane bagasse

Effect of citric acid leaching on the demineralization and thermal degradation behavior of sugarcane trash and bagasse

Co-firing of coal/biomass blends in a pilot plant facility: A comparative study between Opuntia ficus-indica and Pinus radiata

Conversion of guaiacol over different Re active phases supported on CeO2-Al2O3

Catalytic Conversion of Model Tars over Carbon-Supported Ni and Fe

Synthesis and usage of common and functionalized ionic liquids for biogas upgrading

A topological approach to mass barotropic phenomena in asymmetric mixtures

Soot oxidation in the presence of NO over alumina-supported bimetallic catalysts K–Me (Me = Cu, Co, V)

Catalytic filters for the simultaneous removal of soot and NOx: Effect of CO2 and steam on the exhaust gas of diesel engines

Guaiacol transformation over unsupported molybdenum-based nitride catalysts

Evaluation of ion exchange resins for iron control in copper electro-winning solutions

Hydrodeoxygenation of 2- methoxyphenol over Mo2N catalysts supported on activated carbons

High performance thin layer chromatography determination of cellobiosan and levoglucosan in bio-oil obtained by fast pyrolysis of sawdust

Chromatographic approaches for determination of low-molecular mass aldehydes in bio-oil

Roasting kinetics of high-arsenic copper concentrates

Comparison of alumina- and SBA-15-supported molybdenum nitride catalysts for hydrodeoxygenation of guaiacol

Hydrodeoxygenation of Guaiacol over Carbon-Supported Molybdenum Nitride Catalysts: Effects of Nitriding Methods & Support Properties

Pyrolyzed phthalocyanines as surrogate carbon catalysts: Initial insights into oxygen-transfer mechanisms

Thermogravimetric study of interactions in the pyrolysis of coal-biomass blends with Radiata pine sawdust

Kinetics and Reaction Mechanisms of High Temperature flash Oxidation of Molybdenite

About the Active Phases of KNO3/Mgo for Catalytic Soot Combustion

Effect of Ca-Substitution in La1-Xcaxfeo3 Perovskites on the Catalytic Activity for Soot Combustion

Effect of Ag addition on the thermal stability and catalytic properties of LaFeO3 perovskite

Insight on the Promoting Effect of Zr and Ti on the Catalytic Properties of Rh/SiO2 for Partial Oxidation of Methane

Relevance of Sulfiding Pretreatment on the Performance of Re/Zro2 and Re/Zro2-Sulfated Catalysts for the Hydrodeoxygenation of Guayacol

Gold and Silver Cyanidation from a Residue Produced by Leaching Dead-Roasted Copper White Metal

Thermodynamic predictions of performance of a bagasse integrated gasification combined cycle under quasi-equilibrium conditions

Pyrolysis of pre-treated tannins obtained from radiata pine bark

Nir spectroscopy applied to the characterization and selection of pre-treated materials from multiple lignocellulosic resources for bioethanol production

Observed kinetic parameters during the torrefaction of red oak (Quercus rubra) in a pilot rotary kiln reactor

Torrefaction kinetics of red oak (Quercus rubra) in a fluidized reactor

Ni nanoparticles prepared from Ce substituted LaNiO3 for guaiacol conversion

Insights into dynamic surface processes occurring in Rh supported on Zr-grafted gamma-Al2O3 during dry reforming of methane

Effect of hierarchical porosity and fluorination on the catalytic properties of zeolite beta for glycerol etherification

The use of water-extractable Cu, Mo, Zn, As, Pb concentrations and automated mineral analysis of flue dust particles as tools for impact studies in topsoils exposed to past emissions of a Cu-smelter

Effect of P content in the conversion of guaiacol over Mo/Al2O3 catalysts

Effect of water on the conversions of 2-methoxyphenol and phenol as bio-oil model compounds over ReS2/SiO2 catalyst

Leaching kinetics of enargite in alkaline sodium sulphide solutions

Soot oxidation on silver-substituted LaMn0.9Co0.1O3 perovskites

Fast pyrolysis of low and high ash paper waste sludge: Influence of reactor temperature and pellet size

Effect of viscosity on the porosity of granular materials in the moving bed washing process

Hydrodeoxygenation of guaicol over ReS2/activated carbon catalysts. Support and Re loading effect

Magnesia-supported potassium oxide catalysts for soot combustion: effect of Fe addition on the catalyst activity and stability

Burnout synergic or inhibiting effects in combustion of coal-sawdust blends

Vacuum pyrolysis of agricultural wastes and adsorptive criteria description of biochars governed by the presence of oxides

Continuous converting of copper matte to blister copper in a high intensity molten layer reactor

Bio-oil production from biomass by flash pyrolysis in a three stage fluidized bed reactors system

Hydrodeoxygenation of 2-methoxyphenol over different Re active phases supported on SiO2 catalysts

Inherent process variations between fast pyrolysis technologies: A case study on Eucalyptus grandis

Low frequency ultrasound assisted sequential and co-precipitation syntheses of nanoporous RE (Gd and Sm) doped cerium oxide

Lignocellulose pyrolysis with condensable volatiles quantification by thermogravimetric analysis—Thermal desorption/gas chromatography–mass spectrometry method

Energy conversion assessment of vacuum, slow and fast pyrolysis processes for low and high ash paper waste sludge

Torrefaction of Pinus radiata and Eucalyptus globulus: A combined experimental and modeling approach to process synthesis

Structural and chemical modifications of typical South African biomasses during torrefaction

Fast pyrolysis of lignin-coated radiata pine

A modelling approach to the techno-economics of Biomass-to-SNG/Methanol systems: Standalone vs Integrated topologies

Comprehensive Characterization of Sugarcane Bagasse Ash for Its Use as an Adsorbent

Synthesis of palladium nanoparticles on carbon nanotubes and graphene for the chemoselective hydrogenation of para-chloronitrobenzene

Chemical-activated carbons from peach stones for the adsorption of emerging contaminants in aqueous solutions

Poly([(2-methacryloyloxy)ethyl]trimethylammonium chloride): synthesis, characterization, and removal properties of As(V)

Kinetic study of the conversion of 2-methoxyphenol over supported Re catalysts: Sulfide and oxide state

Insights in the mechanism of deposition and growth of RuO2 colloidal nanoparticles over alumina. Implications on the activity for ammonia synthesis

Preliminary biorefinery process proposal for protein and biofuels recovery from microalgae

Exergoeconomic evaluation of an ethanol-fueled solid oxide fuel cell power plant

Torrefaction of wood and bark from Eucalyptus globulus and Eucalyptus nitens: Focus on volatile evolution vs feasible temperatures

Kinetic and in situ FTIR study of CO methanation on a Rh/Al2O3 catalyst

BiOI microspheres for photocatalytic degradation of gallic acid

Forestry Biomass as a Feedstock for Energy Production in Chile: Challenges and Opportunities

Development of a flash pyrolisis process in a three-stages fluidized bed reactor

Potential for Production and Marketing of Bio-Oil Based Chemicals in Chile

Producción y Uso de Gases Biogénicos

Cogeneration Using Residual Forest Biomass – A Case of Study Under Chilean Economic Framework Conditions

Challenges for Sustainable Biomass Utilisation

Determination of Logistic Chain Supply for Biogas Production in Bio Bio Valley, Chile

Pirólise rápida da madeira para producão de bio-óleo

Impacto del tratamiento con ozono sobre las propiedades superficiales del carbón activado

Depolymerization of acetosolv lignin through in-situ catalytic fast pyrolysis

Arsenic phytoextraction by pteris vittata l. and frond conversion by solvolysis: An integrated gentle remediation option for restoring ecosystem services in line with the biorefinery and the bioeconomy

Dynamic simulation of processing high arsenic copper concentrates

Biochar degradation in vitro and in situ

Introduction of SOFC Technology into Cuban Energy Sector: Technical and Sustainability Analysis

Conventional fast pyrolysis of coated biomass as an alternative to the valorization of natural thermoset polymers

Methane dry reforming over Ni supported on pine sawdust activated carbon: effects of support surface properties and metal loading

Comparative Assessment of the Wet and Dry Torrefaction of Pinus Radiata

Hydroxyl radical production by heterogenous Fenton reaction supported in insoluble tannin bark of Pinus radiata

Selective production of formic acid from aqueous phase bio-oil by catalytic oxidation using heteropoly acids (for bio-oil hydrodeoxygenation)

Biorrefinerías Forestales

Elucidating the role of ammonia-based salts on the preparation of cellulose-derived carbon aerogels

Dry reforming of methane on grafted-supported Rh catalysts: effect of the metal-support interaction on the reaction rate

Using Apparent Activation Energy as a Reactivity Criterion for Biomass Pyrolysis

Effect of A-site deficiency in LaMn0.9Co0.1O3 perovskites on their catalytic performance for soot combustion

New concepts in low-temperature catalytic hydrogenation and their implications for process intensification

Pyrolysis and combustion of municipal solid wastes: Evaluation of synergistic effects using TGA-MS

Valorisation of paper waste sludge via fermentation and pyrolysis

Hydroxyl radical production by a heterogeneous Fenton reaction supported in insoluble tannin from bark of Pinus radiata

Development of an analytical method for the main organic compounds derived from thermochemical conversion of biomass

Selective production of formic acid by wet oxidation of aqueous- phase bio-oil

In situ catalytic fast pyrolysis of crude and torrefied Eucalyptus globulus using carbon aerogel-supported catalysts

Steam torrefaction of Eucalyptus globulus for producing black pellets: A pilot-scale experience

Structure-reactivity relationship in pyrolysis of plastics. A comparison with natural polymers

Catalytic hydrodeoxygenation of anisole over ReMoOx/TiO2 catalysts

Ni/HZSM-5 catalyst preparation by deposition-precipitation. Part 1. Effect of nickel loading and preparation conditions on catalyst properties

Conversion of guaiacol over supported ReOx catalysts: Support and metal loading effect

A study of the hydrodeoxygenation of anisole over Re-MoOx/TiO2 catalyst

Catalytic consequences of Ga promotion on Cu for CO2 hydrogenation to methanol

Mechanism and kinetic parameters of glucose and fructose dehydration to 5-hydroxymethylfurfural over solid phosphate catalysts in water

Catalytic combustion of soot. Effects of added alkali metals on CaO-MgO physical mixtures

Combustión catalítica de hollín con K/MgO. Fases activas del catalizador

Efecto de la modificación de SiO2 por injerto de Zr y Ti en la oxidación parcial catalítica de metano

Efecto de la porosidad del soporte carbonoso en la gasificación con O2 catalizada por Co y Cu

Retención de materia orgánica de licor industrial en carbones activados: Influencia de los grupos funcionales superficiales y la textura

Mezclas de CeO2 – MgO como soportes para la oxidación completa de una mezcla de CH4-C10H8

Estabilidad térmica y actividad catalítica durante la combustión completa de acetato de etilo en una perovskita de LaFeO3 dopada con Ag

Efecto del grado de sustitución de Ca en perovskitas La1-xCaxFe2O3 sobre la actividad catalítica para la combustión de hollín emitido por motores diesel

Utilización de K y Fe soportados en MgO, para la combustión catalítica de hollín

Energy Recovery from Municipal Solid Waste (MSW) in Chile

A reaction shrinking core model for pyrolysis and combustion of a single biomass particle

State of the art of the biogas production in Chile

Forests biomass in Chile – Enormous potential for energetic use

Cogeneración en Base a Residuos Madereros y Forestales. Un Análisis Comparativo de Costos de Producción (I)

The Forest Biomass as an Energy Source in Chile