CO metanation by means of Fe catalysts supported in activated carbon

Textural and surface chemical characterization of carbon materials

Thermodynamics and kinetics of graphene reactions with H2O and CO2

Nanoporous Carbons and Hybrid Materials for Environmental Remediation and Production of Solar Fuels

Correlations between Theoretical and Experimental Results in C-doped TiO2 Nanostructured Materials

Carbon-based Catalysts and Photocatalysts for the Integrated Photo-Biorefinery

Eco-Friendly Methodology for the Synthesis of nanoporous graphene base catalytuc membrane reactors

Design of a marabou torrefaction plant for energy purposes

Microwave-assisted synthesis of nanostructured hybrid materials of TiO2 and ZnO doped with C for sensitized solar cells

Fluid dynamic study of mixtures of sugarcane bagasse and sand particles: Minimum fluidization velocity

Prediction of the minimum fluidization velocity of particles of sugarcane bagasse

Effect of citric acid leaching on the demineralization and thermal degradation behavior of sugarcane trash and bagasse

Co-firing of coal/biomass blends in a pilot plant facility: A comparative study between Opuntia ficus-indica and Pinus radiata

Conversion of guaiacol over different Re active phases supported on CeO2-Al2O3

Catalytic Conversion of Model Tars over Carbon-Supported Ni and Fe

Synthesis and usage of common and functionalized ionic liquids for biogas upgrading

A topological approach to mass barotropic phenomena in asymmetric mixtures

Soot oxidation in the presence of NO over alumina-supported bimetallic catalysts K–Me (Me = Cu, Co, V)

Catalytic filters for the simultaneous removal of soot and NOx: Effect of CO2 and steam on the exhaust gas of diesel engines

Guaiacol transformation over unsupported molybdenum-based nitride catalysts

Evaluation of ion exchange resins for iron control in copper electro-winning solutions

High performance thin layer chromatography determination of cellobiosan and levoglucosan in bio-oil obtained by fast pyrolysis of sawdust

Chromatographic approaches for determination of low-molecular mass aldehydes in bio-oil

Roasting kinetics of high-arsenic copper concentrates

Comparison of alumina- and SBA-15-supported molybdenum nitride catalysts for hydrodeoxygenation of guaiacol

Hydrodeoxygenation of Guaiacol over Carbon-Supported Molybdenum Nitride Catalysts: Effects of Nitriding Methods & Support Properties

Pyrolyzed phthalocyanines as surrogate carbon catalysts: Initial insights into oxygen-transfer mechanisms

Thermogravimetric study of interactions in the pyrolysis of coal-biomass blends with Radiata pine sawdust

Kinetics and Reaction Mechanisms of High Temperature flash Oxidation of Molybdenite

About the Active Phases of KNO3/Mgo for Catalytic Soot Combustion

Effect of Ca-Substitution in La1-Xcaxfeo3 Perovskites on the Catalytic Activity for Soot Combustion

Effect of Ag addition on the thermal stability and catalytic properties of LaFeO3 perovskite

Insight on the Promoting Effect of Zr and Ti on the Catalytic Properties of Rh/SiO2 for Partial Oxidation of Methane

Catalytic combustion of soot. Effects of added alkali metals on CaO-MgO physical mixtures

Gold and Silver Cyanidation from a Residue Produced by Leaching Dead-Roasted Copper White Metal

Thermodynamic predictions of performance of a bagasse integrated gasification combined cycle under quasi-equilibrium conditions

Pyrolysis of pre-treated tannins obtained from radiata pine bark

Nir spectroscopy applied to the characterization and selection of pre-treated materials from multiple lignocellulosic resources for bioethanol production

Observed kinetic parameters during the torrefaction of red oak (Quercus rubra) in a pilot rotary kiln reactor

Torrefaction kinetics of red oak (Quercus rubra) in a fluidized reactor

Ni nanoparticles prepared from Ce substituted LaNiO3 for guaiacol conversion

Insights into dynamic surface processes occurring in Rh supported on Zr-grafted gamma-Al2O3 during dry reforming of methane

Effect of hierarchical porosity and fluorination on the catalytic properties of zeolite beta for glycerol etherification

The use of water-extractable Cu, Mo, Zn, As, Pb concentrations and automated mineral analysis of flue dust particles as tools for impact studies in topsoils exposed to past emissions of a Cu-smelter

Leaching kinetics of enargite in alkaline sodium sulphide solutions

Soot oxidation on silver-substituted LaMn0.9Co0.1O3 perovskites

Fast pyrolysis of low and high ash paper waste sludge: Influence of reactor temperature and pellet size

Effect of viscosity on the porosity of granular materials in the moving bed washing process

Hydrodeoxygenation of guaicol over ReS2/activated carbon catalysts. Support and Re loading effect

Magnesia-supported potassium oxide catalysts for soot combustion: effect of Fe addition on the catalyst activity and stability

Burnout synergic or inhibiting effects in combustion of coal-sawdust blends

Vacuum pyrolysis of agricultural wastes and adsorptive criteria description of biochars governed by the presence of oxides

Continuous converting of copper matte to blister copper in a high intensity molten layer reactor

Bio-oil production from biomass by flash pyrolysis in a three stage fluidized bed reactors system

Hydrodeoxygenation of 2-methoxyphenol over different Re active phases supported on SiO2 catalysts

Inherent process variations between fast pyrolysis technologies: A case study on Eucalyptus grandis

Low frequency ultrasound assisted sequential and co-precipitation syntheses of nanoporous RE (Gd and Sm) doped cerium oxide

Lignocellulose pyrolysis with condensable volatiles quantification by thermogravimetric analysis—Thermal desorption/gas chromatography–mass spectrometry method

Energy conversion assessment of vacuum, slow and fast pyrolysis processes for low and high ash paper waste sludge

Life-Cycle Assessment of coal–biomass based electricity in Chile: Focus on using raw vs torrefied wood

Torrefaction of Pinus radiata and Eucalyptus globulus: A combined experimental and modeling approach to process synthesis

Structural and chemical modifications of typical South African biomasses during torrefaction

Fast pyrolysis of lignin-coated radiata pine

A modelling approach to the techno-economics of Biomass-to-SNG/Methanol systems: Standalone vs Integrated topologies

Comprehensive Characterization of Sugarcane Bagasse Ash for Its Use as an Adsorbent

Synthesis of palladium nanoparticles on carbon nanotubes and graphene for the chemoselective hydrogenation of para-chloronitrobenzene

Chemical-activated carbons from peach stones for the adsorption of emerging contaminants in aqueous solutions

Poly([(2-methacryloyloxy)ethyl]trimethylammonium chloride): synthesis, characterization, and removal properties of As(V)

Kinetic study of the conversion of 2-methoxyphenol over supported Re catalysts: Sulfide and oxide state

Insights in the mechanism of deposition and growth of RuO2 colloidal nanoparticles over alumina. Implications on the activity for ammonia synthesis

Preliminary biorefinery process proposal for protein and biofuels recovery from microalgae

Exergoeconomic evaluation of an ethanol-fueled solid oxide fuel cell power plant

Torrefaction of wood and bark from Eucalyptus globulus and Eucalyptus nitens: Focus on volatile evolution vs feasible temperatures

Kinetic and in situ FTIR study of CO methanation on a Rh/Al2O3 catalyst

Combustión catalítica de hollín con K/MgO. Fases activas del catalizador

Efecto de la modificación de SiO2 por injerto de Zr y Ti en la oxidación parcial catalítica de metano

Efecto de la porosidad del soporte carbonoso en la gasificación con O2 catalizada por Co y Cu

Retención de materia orgánica de licor industrial en carbones activados: Influencia de los grupos funcionales superficiales y la textura

Mezclas de CeO2 – MgO como soportes para la oxidación completa de una mezcla de CH4-C10H8

Estabilidad térmica y actividad catalítica durante la combustión completa de acetato de etilo en una perovskita de LaFeO3 dopada con Ag

Efecto del grado de sustitución de Ca en perovskitas La1-xCaxFe2O3 sobre la actividad catalítica para la combustión de hollín emitido por motores diesel

Utilización de K y Fe soportados en MgO, para la combustión catalítica de hollín

Energy Recovery from Municipal Solid Waste (MSW) in Chile

A reaction shrinking core model for pyrolysis and combustion of a single biomass particle

State of the art of the biogas production in Chile

Forests biomass in Chile – Enormous potential for energetic use

Cogeneración en Base a Residuos Madereros y Forestales. Un Análisis Comparativo de Costos de Producción (I)

The Forest Biomass as an Energy Source in Chile

Forestry Biomass as a Feedstock for Energy Production in Chile: Challenges and Opportunities

Development of a flash pyrolisis process in a three-stages fluidized bed reactor

Potential for Production and Marketing of Bio-Oil Based Chemicals in Chile

Producción y Uso de Gases Biogénicos

Cogeneration Using Residual Forest Biomass – A Case of Study Under Chilean Economic Framework Conditions

Challenges for Sustainable Biomass Utilisation

Determination of Logistic Chain Supply for Biogas Production in Bio Bio Valley, Chile

Pirólise rápida da madeira para producão de bio-óleo

Impacto del tratamiento con ozono sobre las propiedades superficiales del carbón activado

Depolymerization of acetosolv lignin through in-situ catalytic fast pyrolysis

Arsenic phytoextraction by pteris vittata l. and frond conversion by solvolysis: An integrated gentle remediation option for restoring ecosystem services in line with the biorefinery and the bioeconomy

Dynamic simulation of processing high arsenic copper concentrates

Biochar degradation in vitro and in situ

Introduction of SOFC Technology into Cuban Energy Sector: Technical and Sustainability Analysis

Conventional fast pyrolysis of coated biomass as an alternative to the valorization of natural thermoset polymers

Methane dry reforming over Ni supported on pine sawdust activated carbon: effects of support surface properties and metal loading

Comparative Assessment of the Wet and Dry Torrefaction of Pinus Radiata

Hydroxyl radical production by heterogenous Fenton reaction supported in insoluble tannin bark of Pinus radiata

Selective production of formic acid from aqueous phase bio-oil by catalytic oxidation using heteropoly acids (for bio-oil hydrodeoxygenation)

Physico-chemistry and kinetics mechanisms of partial roasting of high arsenic copper concentrates

Recovery of copper, molybdenum, zinc and iron from copper smelter slags

Biorrefinerías Forestales

Bioetileno: Hacia el Desarrollo de Biorefinerías en la región del Bío-Bío

Elucidating the role of ammonia-based salts on the preparation of cellulose-derived carbon aerogels

Dry reforming of methane on grafted-supported Rh catalysts: effect of the metal-support interaction on the reaction rate

Using Apparent Activation Energy as a Reactivity Criterion for Biomass Pyrolysis

Exergoeconomic valuation of a waste-based integrated combined cycle (WICC) for heat and power production

Effect of A-site deficiency in LaMn0.9Co0.1O3 perovskites on their catalytic performance for soot combustion

New concepts in low-temperature catalytic hydrogenation and their implications for process intensification

Pyrolysis and combustion of municipal solid wastes: Evaluation of synergistic effects using TGA-MS

Valorisation of paper waste sludge via fermentation and pyrolysis

Hydroxyl radical production by a heterogeneous Fenton reaction supported in insoluble tannin from bark of Pinus radiata

Development of an analytical method for the main organic compounds derived from thermochemical conversion of biomass

Selective production of formic acid by wet oxidation of aqueous- phase bio-oil

In situ catalytic fast pyrolysis of crude and torrefied Eucalyptus globulus using carbon aerogel-supported catalysts

Steam torrefaction of Eucalyptus globulus for producing black pellets: A pilot-scale experience

Structure-reactivity relationship in pyrolysis of plastics. A comparison with natural polymers

Catalytic hydrodeoxygenation of anisole over ReMoOx/TiO2 catalysts

Ni/HZSM-5 catalyst preparation by deposition-precipitation. Part 1. Effect of nickel loading and preparation conditions on catalyst properties

Conversion of guaiacol over supported ReOx catalysts: Support and metal loading effect

A study of the hydrodeoxygenation of anisole over Re-MoOx/TiO2 catalyst

Exergoenvironmental analysis of a waste-based Integrated Combined Cycle (WICC) for heat and power production

Catalytic consequences of Ga promotion on Cu for CO2 hydrogenation to methanol

Mechanism and kinetic parameters of glucose and fructose dehydration to 5-hydroxymethylfurfural over solid phosphate catalysts in water